Can you remove the E brake from a 300ex?

[rebelbuggy]

I have a 300ex and I was looking today, the E brake doesnt even work, I wanted to know would it be okay to remove the cable and all from the brake cyclinder or whatever, and can I remove that silver part on the brake leaver and the pin and all???

I wanted to clean up my cluth lever and all I got to get me a new one already cause this one has been broken and held one with hose clamps:eek: ( I didnt do that it wa slike that when I got the bike)


Also I am guessing I need a speical cluth lever since I do have reverse? Or could I just get a normal one and use my finger to put the bike in reverse?

has anyone moded any thing else to do this?

Thanks

[Sjorge450R]

first off, you are going to need to get a parking brake block off kit. It will cover the spot the e-brake took up. Then for a new clutch lever, look into getting one with hot start and use the hot start lever for reverse. Thats what I do.

[rebelbuggy]

Originally posted by Sjorge300EX
first off, you are going to need to get a parking brake block off kit. It will cover the spot the e-brake took up. Then for a new clutch lever, look into getting one with hot start and use the hot start lever for reverse. Thats what I do.

Okay , well can you explain what a hot start lever is?
Got a link to a place that sells them? or something thanks

[Sjorge450R]

here it is. I run the same excact set-up.

http://asvinventions.com/levers_order/images/CMF31-K.jpg

[rebelbuggy]

Originally posted by Sjorge300EX
here it is. I run the same excact set-up.

http://asvinventions.com/levers_order/images/CMF31-K.jpg

Oh cool, so you just press that short lever for the reverse right!
Thats neat. clean looking also.