450r jetting???? tryied other section

[sburton1]

what a good starting poing for my 450r carb
tryied posting in the carb section but no ansures cant seem to find and one with a close setup to help out

im at sea leavel
mods are full exhausts with pipe, stock bore, uni filter with outerwears "lid off", wb rev box. i just need a good starting point with the pilot and the main so i can order them from jets r us. im guessing a 48 pilot but dont know on the mains does 170 sound to high?? thanks guys

[cals400ex]

i really don't know what to tell you either. i would run the stock jetting besides the main for starters. for that i would try around a 170 or 180 and work your way down until its good. if it stumbles at high rpm's then its too big.

[sburton1]

thanks what is the stock pilot jet for a 450r carb? and how screw turns sounds about right 2or3 maby and needle on the center clip?? thanks

cole