anyone use the g force spacers

[450rboy]

anyone ever use the g force spacers. if you have did you have any problems with the front wheel spacers

[cdale2002]

I just installed a set of them all the way around on my dads Raptor 700 but we have yet to actually ride. They do look to be well built but one thing to note is they have lug nuts that are made of a cheap materiial that seem to strip pretty easily.

[JoE4554]

I broke the studs when I was putting them on the first day I got them. After that , i saved my money and got a +2 front end.

[jrm03]

I have had them on my quad for about a month with no problems. I used a torque wrench to put on the nuts and did not have a problem either. ONly complaint (which I thinnk is for all spacers) is the exposed caliper, but its a cheap alternative.

[DEVINF450R]

I have went through 3 sets of tie rods when I had them on the front..and now an axle with them on the rear. I think putting them on the rear made handling better than the front...plus you lots more feedback from the wheels with them on the front..which
actually decreases the handling of the machine

[jrm03]

I agree. I put them on the front to even up the front and rear after the purchase of the aftermarket axle. You will notice a lot more feedback from any impacts on the front end, whether it be from crossing a log or a ditch. My quad is now a lot harder to slide. just my thoughts

[esr250r86]

I currently have rear g force spacers and they feel pretty good, but they are nothing like an aftermarket axle. Good alternative if your broke though.:)