PDA

View Full Version : bar clean up wiring



dg95
08-16-2006, 11:20 AM
has anyone removed the switches and replace them with a dirtbike kill switch? i've got the killswitch/starter coversion figured out but what i need to know is for the regular kill switch do i connect the orange wires completing the circuit or is completing the circuit how it shuts off? i want to completely remove the handlebar wiring harness any help would be appreciated

armoks
08-16-2006, 06:12 PM
Is this what you are looking for?
http://i4.photobucket.com/albums/y114/armoks/PICT0227.jpg

armoks
08-16-2006, 06:19 PM
http://i4.photobucket.com/albums/y114/armoks/quadpics.jpg

i just spliced the wires from the start button to that red button, and spliced the on/off switch wires together. I ran the teather to the white wire coming off the coil on the right side of the quad (its right behind the upper motor mount) and the ground to one of the bolts on the stearing stem.

For headlights since I won't need a high and low beam so I just spliced the high beam wires together so they will always be on when the key is on the headlight setting.

the cable for the idle advance is just stuffed under the plasic so its out of he way.