im getting a powroll 415exkit but i got ???????

[WB400ex]

i am getting all of this from powroll. heavy duty clutch springs 21.00 high rev cdi box 117.00 hardfaced rockers 279.80 high performance valve springs 120.00 hardweld camshaft 175.00 and well of corse the 415cc bore kit 234.95. i will also be taking off the airbox lid and i will also get a k and n air filter and i already have the white brothers e series pipe slip on. my questions are does this sound like a good setup for racing and duning? are the prices too high? around how much HP will it put out? and is there anything else i should get? thanx for all the help.

Those prices are high compared to what I pay. Call Jeff at Hobbytime Motorsports in Bolivar, MO

[ccole400EX]

You could do the 416 alost cheaper. Je piston from Marcums $125 bore jop at shop $40 -$50 get a cam that don't have to have hard faced rockers. (I like the HRC cam it works very well.) HRC, GT thunder or the XR cam and i'm sure there are other's out there. But the prices range from XR $120 Gt $179 or the HRC at $277. You could also get the play porting from Gt thunder for $50 some say it helps others say not. I think it works well with my setup. With the extra money you save going this way you could buy the carb that you will need and you should have a nice running quad. Good luck on wich ever way you choose.

You will still save a little more if you call Jeff @ HobbyTime motorsports 417-777-4576

[rhandw69]

I was going to just drive down and pick up my kit from Powroll, but really after researching it on the net, i found i could save about 100 dollars by going through Marcums.
Search around, there are a few cheaper companies out there to go with and still get the same product.
Powroll really knnows there stuff, but i really think that the prices they offer are really inflated based on there name.
Rhan