Sandtrax stock stroke top end for sale Boyesen ports, Paul Turner head, complete read

[broke]

Complete top end, cylinders, pistons, wrist pins, WP bearings, Duncan/Paul Turner cool head, 18cc domes and complete set of O-rings. The cylinders are at 65.20 bore. Ported By Lonnie Eubanks of Sandtrax Racing out of Tulsa OK.

This is a strong running stock stroke top end. It is complete, ready to run as is. The cylinders still have most of the crosshatch visable, but I would run a hone through them if I were putting them on my motor although it is not needed. The intake work is clean with ports added on each side, transfers have a very clean knife cut, exhaust has been opened up quite a bit. I would classify the porting as dune/drag. I do not have port timing specs, but I'm sure they can be had from Sandtrax with a phone call or Email.

This top end needs nothing but 110 octane.

Please ignore the upsidedown water neck.

$500 shipped


http://www2.propichosting.com/Images/501084/106.JPG

http://www2.propichosting.com/Images/501084/105.JPG

http://www2.propichosting.com/Images/501084/104.JPG

http://www2.propichosting.com/Images/501084/103.JPG

http://www2.propichosting.com/Images/501084/102.JPG

http://www2.propichosting.com/Images/501084/101.JPG

http://www2.propichosting.com/Images/501084/81.JPG

http://www2.propichosting.com/Images/501084/77.JPG