clutt225
07-29-2006, 11:35 AM
Ok first off I know it will fit. What I am wondering is has it caused the problems that I now have? When I bought the quad the previuos owner had put in a 250r axle and hubs that were in rough shape, rust and chiped crome. The carrier also had a crack in it. Assuming that they were the same I installed an older but mint RPM Dominator axle with a 400ex carrier and hubs. The quad also has a houser swing arm on it now. Every thing was in good shape six months ago now the sprocket side bearings in the carrier are done.
The plan is to get a houser twin row carrier for a 450r swing arm. What I am wondering is will the 400ex axle fit the bearrings that will come in the 450r aftermarket carrier? I would rather not sell this axle. RPM's don't seem as good any more and this one is mint.
The plan is to get a houser twin row carrier for a 450r swing arm. What I am wondering is will the 400ex axle fit the bearrings that will come in the 450r aftermarket carrier? I would rather not sell this axle. RPM's don't seem as good any more and this one is mint.