carb

[ebo 4356]

I just got an hmf pipe and after i changed my main jet i rode it and now i need to put a pilot jet in and i guess the guy i bought the quad off of messed up the one of the philip head screws and now i cant take the bottom of the carb off to get ti the pilot jet. How do i get it off.

[WhtPrd09]

if u cant get it off any other way the last way i would try is some pliers or vise grips.

[300exOH]

You may be able to use a dremel tool to cut a groove in the screw and use a flat scrwdriver to remove it. Just be careful not to cut into the carb/bowl.

[TRX23rider]

Originally posted by 300exOH
You may be able to use a dremel tool to cut a groove in the screw and use a flat scrwdriver to remove it. Just be careful not to cut into the carb/bowl.

thats what i had to do with mine. after you get them all out you can replace them with some stronger allen head bolts.

[Nick shupe]

get the dremel out it's time to start cuttin :D