Chino886
07-22-2006, 02:29 PM
LET'S TRY THIS AGAIN........ PLEASE SEND PMs WITH OFFERS, I CHECK PMs DAILY, YOU MUST BE ABLE TO MAKE PAYMENT WITHIN 3 DAYS, I DON'T WANT TO BE 50 YRS OLD BEFORE I FINISH PARTING IT OUT......
LIKE I STATED BEFORE, I WILL NOT PART IT UNLESS MOST OF IT IS SPOKEN FOR, IF YOU THINK THE PRICE IS TOO HIGH, MAKE AN OFFER, THE WORST THING THAT CAN HAPPEN IS THAT I SAY NO. I HAVE AN INDIVIDUAL INTERESTED IN THE WHOLE THING, BUT IT IS CONDITIONAL, SO IF I CAN GET MOST OF THE PARTS SPOKEN FOR BY MONDAY. IF YOU WANT THE WHOLE QUAD WITH ALL OF THE EXTRA PARTS I HAVE FOR IT, $5,500.
IF YOU HAVE ANY QUESTIONS, PLEASE CALL 816-678-5235, ASK FOR DAVE
Motor $1100 - JE 10.5:1 piston, HC Stg II, P & P, Sparks Key, Hinson basket, HD Cam Chain. BONUS-will include Sparks 12.5:1 piston, head gasket, and HD Studs if wanted, or drop price $100
Sparks X-6 full system $350
Houser LT A-arms $450 - All heims are tight, spent an arm and a leg replacing the upper ones as many members on here discovered that the are $55/each. The dust boot on one lower arm is ripped (like that when I got it, but since its a heim, it doesn't matter) ***Sale pending to Thorracing37
Roll Design +1.25" Swingarm -need I say more $750
LSR Axcalibur +2, +4 $225 - name says it all
LSR Anti-Fade Locknut w/ Wave rotor - $200
Shocks: Front: Custom Axis 19.25" Comp/Reb Adj, Remote Rezzie $750 (you can get a new seal and service for $100 at most places, springs could use new paint or powder)
Rear: Elka dual rate Comp/Reb Adj w/ Elka Link $750 (serviced in March or April 2006 by C & D, new rezzie line, oil)
UM Airbox - $125 Relocates battery inside of airbox, suggested use with K & N, but I have used it with UNI also, no problems
Pringry Oil Tank $100 - in good shape, the drain bolt was stripped from the S O B that I bought it from, so I retapped it and have a new bolt/crush washer for it, the drain bolt is beefier than on a OEM oil tank***Sale Pending to Billyboy
GWC stem $175 (chrome) - good stem, straight
Wheels/Tires: Fronts: Douglas .190 3:2 w/ ITP Holeshots 19x6x10
Rears: Douglas 8x8 w/ grooved tamers, in good shape 18x10x8
Let me know if there is anything else you need, I am parting out a complete running 400EX, I don't have time to list all the little parts.
First come first serve.....Shoot me reasonable offers.....Large Items must go first
http://img337.imageshack.us/img337/4569/400ex13lo5.jpg
http://img343.imageshack.us/img343/2900/400ex12if8.jpg
http://img516.imageshack.us/img516/313/400ex16in0.jpg
http://img337.imageshack.us/img337/6977/plastic4tx3.jpg
http://img343.imageshack.us/img343/1069/axis2ol9.jpg
Lets get it parted out!
LIKE I STATED BEFORE, I WILL NOT PART IT UNLESS MOST OF IT IS SPOKEN FOR, IF YOU THINK THE PRICE IS TOO HIGH, MAKE AN OFFER, THE WORST THING THAT CAN HAPPEN IS THAT I SAY NO. I HAVE AN INDIVIDUAL INTERESTED IN THE WHOLE THING, BUT IT IS CONDITIONAL, SO IF I CAN GET MOST OF THE PARTS SPOKEN FOR BY MONDAY. IF YOU WANT THE WHOLE QUAD WITH ALL OF THE EXTRA PARTS I HAVE FOR IT, $5,500.
IF YOU HAVE ANY QUESTIONS, PLEASE CALL 816-678-5235, ASK FOR DAVE
Motor $1100 - JE 10.5:1 piston, HC Stg II, P & P, Sparks Key, Hinson basket, HD Cam Chain. BONUS-will include Sparks 12.5:1 piston, head gasket, and HD Studs if wanted, or drop price $100
Sparks X-6 full system $350
Houser LT A-arms $450 - All heims are tight, spent an arm and a leg replacing the upper ones as many members on here discovered that the are $55/each. The dust boot on one lower arm is ripped (like that when I got it, but since its a heim, it doesn't matter) ***Sale pending to Thorracing37
Roll Design +1.25" Swingarm -need I say more $750
LSR Axcalibur +2, +4 $225 - name says it all
LSR Anti-Fade Locknut w/ Wave rotor - $200
Shocks: Front: Custom Axis 19.25" Comp/Reb Adj, Remote Rezzie $750 (you can get a new seal and service for $100 at most places, springs could use new paint or powder)
Rear: Elka dual rate Comp/Reb Adj w/ Elka Link $750 (serviced in March or April 2006 by C & D, new rezzie line, oil)
UM Airbox - $125 Relocates battery inside of airbox, suggested use with K & N, but I have used it with UNI also, no problems
Pringry Oil Tank $100 - in good shape, the drain bolt was stripped from the S O B that I bought it from, so I retapped it and have a new bolt/crush washer for it, the drain bolt is beefier than on a OEM oil tank***Sale Pending to Billyboy
GWC stem $175 (chrome) - good stem, straight
Wheels/Tires: Fronts: Douglas .190 3:2 w/ ITP Holeshots 19x6x10
Rears: Douglas 8x8 w/ grooved tamers, in good shape 18x10x8
Let me know if there is anything else you need, I am parting out a complete running 400EX, I don't have time to list all the little parts.
First come first serve.....Shoot me reasonable offers.....Large Items must go first
http://img337.imageshack.us/img337/4569/400ex13lo5.jpg
http://img343.imageshack.us/img343/2900/400ex12if8.jpg
http://img516.imageshack.us/img516/313/400ex16in0.jpg
http://img337.imageshack.us/img337/6977/plastic4tx3.jpg
http://img343.imageshack.us/img343/1069/axis2ol9.jpg
Lets get it parted out!