MOOSE clutch, Holeshots, Pro taper fat bars

[dustinb]

anyone intersted in:

Pro taper fat bars gold?

Moose Clutch perch and lever quick adjust

Nacs Billet 250R stem clamp blue

Holeshot MX rears with a dent in one of the douglas rims.
about 85% tread left and hold air fine

2 Uni 250R filters great shape

"Speed" 250r locknut 3 peice

250R rear master cylinder good shape

also have a good rear rotor that has about 10 hours on it and the hub

give me your best offer on these parts i just need them gone asap!!!

[zlam27]

about how much are you looking to get for the 250R filters and the fatbars?

[dustinb]

jsut throw out an offer and more than likely ill take it. that wouldnt be much on shipping for those 3 things soo just let me know im negotiable. and need cash for my new LTR sooo

[zlam27]

are the bars anodized gold?

im not sure the UNI filters will work for my application but how about $15 + few bucks for shipping?

is there any way you could get a picture of them? i have an aluminum airbox and i want to know if they will fit it or not.

zach

[dustinb]

Im sure the filters will fit on any 250r or 400ex regardless of the airbox. Yea the bars are anodized gold and they look very good. also heres a link to my bike pics page...... this is when my bike was NOT redone but still some pretty good pics of the parts for sale here. http://bikepics.com/members/dustinb/87trx250/

[dustinb]

i have lots of small parts that i have not had time to put on ebay yet, like LSR carrier, All the misc bolts and a LSR almost new pivot bolt and nut, motor mounts, beat up JB -1 3/8 swingarm, white meier rear plastic with some minor scuffs and the bottom little bit was cut down for racing but all in all good shape. 36, 38, 14, 15 tooth sprockets all in good shape, TM design chain guide. stock chain slider, Tie rod ends in PERFECT shape, stock radiator in good shape with mounts, white meier gas tank cover, stock gas tank and petcock, lots of other misc things just ask................

[brian-250]

Moose perch, lever still have it? everything still tight on it? how much you want for it?

[dustinb]

yes everything is still tight, it was used for about 15 hours, i want 35 shipped for it

[dustinb]

BUMP..... i need this stuff gone just make an offer or it hits ebay along with everythign else i have for sale there

[yernkie]

Price for the rear Holeshots shipped to 66071? Please email me at johns@sunflowercenters.com cause I don't check my PM's very often. Thanks.

[warriorxcr1]

you have another pm bro... ready to send money out!!

[dustinb]

BUMP i will let go cheapp if i dont have to put this stuff on ebay.

[exrider008]

bottom $ on the bearing carrier and do u still have the clutch perch?

[dustinb]

60 shipped on carrier and yes i do still have the perch if you buy them both i can give you a better deal. id say 72 shipped

[exrider008]

how r the bearing and seals and what kind of shape is it in? can i get pics. and im gessing its for a 400ex/250r??

[dustinb]

the outside is beat up from being taken on and put on numerous times. the adjust holes are also worn from adjusting. but the inside is PERFECT. like new bearings and seals that were greased VERY well. sorry i dont have good pics of that yet since the rear end is the next and last thing i need to dissasemble still.

[exrider008]

im going to pass. im getting a new one cuz mine looks beat up so i dont need another one that looks like mine. thanks anyway!