Help On Clutchs

[stock350raptor]

This is my first time to change clutches and i need some advice on the process of changing clutches.

[daddio]

Originally posted by stock350raptor
This is my first time to change clutches and i need some advice on the process of changing clutches.

I'm not trying to be a smart aleck, but you're best bet, is to buy a Yamaha service manual. It has directions and torque specs along with alot of other helpful info, if you're going to be working on your own bike.

[Quadrider63]

its the easiest thing to do
the first thing u want to do is stand the quad on its side with the clutch cover side facing up then take out the 6 bolts on the clutch cover and then gently pull it off if u are care full u wont need to buy a gasket then after removing the cover there will be like 5 bolts with springs under them remove all 5 of them and then pull off that sliver disc that they were holding down and then u will see the friction plates and remove those and the metal plates and put in the new ones and your done easy