PDA

View Full Version : Problem.........



WhiteYFZ
07-18-2006, 12:27 PM
Ok, guys i have a porblem. My bike is not getting any spark, and the two wires that are coming from the stator (yellow and white) are getting hot when i turn the key. I switched out the CDI Box, Rectifior,Coil, And I got a new stator. still didnt resolve the problem. I was just wondering if anyone had some backround on this... thanks alot

espo

07-18-2006, 02:24 PM
I will change the spark plug wire...

intruder
07-18-2006, 06:07 PM
There is no spark plug wire on the YFZ. The coil and cap are all together.

intruder
07-18-2006, 06:11 PM
Have you checked all the wires under the hood you'll have to remove the tape. Also check near the battery there's a connector with one wire that sometimes comes unpluged or breaks I think it's a green wire.

WhiteYFZ
07-18-2006, 07:15 PM
i checked every single wire. the whole harness is apart

MXracer16
07-19-2006, 03:44 PM
Originally posted by WhiteYFZ
i checked every single wire. the whole harness is apart

Well theres your problem, you have your wiring harness ripped apart.

bsjoe
07-19-2006, 03:54 PM
Spark plug
Ignition coil
Battery
Bad ground connection to the motor from the battery
Kill switch----take out of the circuit
TORS
CDI
Clutch switch
Loose/broken wire/plug connection somewhere
Run/off switch faulty
Key switch faulty
Bad starting circuit cut-off relay
Bad diode somewhere


^^ check those