PDA

View Full Version : arctic cat 650 vs 700



TTZ450
07-17-2006, 12:29 PM
DOES ANYONE HAVE ANY IDEA WHAT THE HORSEPOWER AND TORQUE IS ON THESE TWO QUADS?

12-30-2006, 09:13 AM
check this too :) ;) :)

regards, Adjohatardder

cory
12-30-2006, 03:53 PM
Around 27 to the wheels. Pipes and stuff help out a little....about 4 or 5 hp to the wheels. Don't know about the torque...forgot the formula.

quad97
03-27-2007, 06:17 PM
From a seat of the pants feel the 650 H1 has more low end, very close on top.

woodsracer144
04-07-2007, 10:44 PM
the 650 has mid.. very little... and alot of top end...i was on my blaster(even 200 ish bore) and my bro got the 650 h1 and i had him utill i hit about 3-4th gear then he pulled on me.. i thik i would be able to hold him some what beause i for reeds in her now...

zeus54
05-09-2007, 04:17 PM
34.7 HP 21.2 FT LBS> TORQUE 650 H1
41.2 HP 28.6 FT LBS> TORQUE 700 EFI

And just for the hell of it........
33.5 HP 25.9 FT LBS> TORQUE 650 V2
28.0 HP 17.6 FT LBS> TORQUE 500 AUTO OR SEMI-AUTO
24.7 HP 15.3 FT LBS> TORQUE 400 AUTO OR SEMI-AUTO
:D

kdboutel
12-01-2007, 06:17 PM
Originally posted by zeus54
34.7 HP 21.2 FT LBS> TORQUE 650 H1
41.2 HP 28.6 FT LBS> TORQUE 700 EFI

And just for the hell of it........
33.5 HP 25.9 FT LBS> TORQUE 650 V2
28.0 HP 17.6 FT LBS> TORQUE 500 AUTO OR SEMI-AUTO
24.7 HP 15.3 FT LBS> TORQUE 400 AUTO OR SEMI-AUTO
:D

Zeus,

I know you posted this a while ago, but do you remember where you got the info? I did know a site that listed quite a few quads to compare HP and torque ratings but I have no idea what I did with the url.

Thanks in advance!

cory
12-02-2007, 07:21 AM
I think he made them up.....

http://hmfengineering.com/forums/showthread.php?t=1837

http://hmfengineering.com/forums/showthread.php?t=1835

kdboutel
12-02-2007, 07:41 AM
Originally posted by cory
I think he made them up.....

http://hmfengineering.com/forums/showthread.php?t=1837

http://hmfengineering.com/forums/showthread.php?t=1835

Thanks for the links Cory!