PDA

View Full Version : idle ajustment, asap



fast raptor
07-17-2006, 09:40 AM
so i just got a banshee and the idle is a bit to low, i am preaty sure the screw i need to ajust is the one on the side of the carb with the locking nut, but i dont wanna change any of the jetting so, is that the screw that ajust the idle?

'02 Banshee
07-17-2006, 01:32 PM
do you have the tors still???? if so the adjustment is on the top of the tors the two knobs you will see them if u take the seat off.....if you dont the idle screws are on the sides they are gold and they do have a nut to hold htem secure them on the carbs....loosen the nut and turn the screw in about a half a turn or whatever u want it ot idle at.....(turn screw in idle up OUT idles down

fast raptor
07-17-2006, 01:34 PM
ok, thanks, and the tors is already removed!

robjohn74
07-17-2006, 08:48 PM
when doing that pull your filters off and make sure the Slides are even.....

fast raptor
07-17-2006, 08:50 PM
i already did it and it is runing great!