how wide do +2 arms make your quad?

[aneuploidy]

With stock rims, how wide will +2 a arms make the 05 TRX450r?

[250r4life]

well... what you do is take the stock width, which we'll call X...

and then you add 2 for one side, and two for the other, in other words 2*2 or 4...

and then to figure out the total, you take 4 and add it to X....

X+4= new width :D












sorry man... you'd have to look up the stock specs...

[aneuploidy]

Ah, so 2 + 2 = 4

got it

No, I want ta know if +2 arms with stock rims are going to give me 50 inches or 48 inches. I thought it should be 50, but I've been told otherwise.

But thanks for the math lesson:D

[Over-land 450r]

less than 50

[Mx_523]

Well,

46.3+4= 50.3

46.3 inches is the width of a 06 model though. Not sure if its the same as a 05. But you get the idea.

[250r4life]

Originally posted by aneuploidy
Ah, so 2 + 2 = 4

got it

No, I want ta know if +2 arms with stock rims are going to give me 50 inches or 48 inches. I thought it should be 50, but I've been told otherwise.

But thanks for the math lesson:D

:D

im glad you took it well- there are far too many people here that cant take a joke and let internet stuff get to them...

[dr.paine]

they only make your a-arm longer not the quad. the a arm is on an angle so you would have to do a little trig to figure out exactly what it is going to be. it will be close to 4in wider but not entirely

[bwamos]

Originally posted by Mx_523
Well,

46.3+4= 50.3

46.3 inches is probably the width of a 06 model though. Not sure if its the same as a 05. But you get the idea.

46.3" is the width of the rear end.. the front end on stock quads is sually 1-2" narrower for some odd reason.

[tltcracing]

some places make +2.5 arms so +2 are not going to make it too wide to race. also now a days most of the products you see are ok to race. the compainies wont make a product that cant be raced because then no one would buy it.

[MAD450r]

I have +2's on both my 416ex and my 450r.
my lonestars on my ex made it sit at 48+ a bit.
the burgards on my R make it sit at 49

now for the rear.

my ex is at 49 or so with my razr mx's and my lonestar 2+2 axle
my R has a +3 g-force with razr 1's and it sits right at 50 inches


My next front end on my R will be +2.5 per side
then i'll be at 50 front and back