Blaster Front Brakes ?? Hydraulic ??

[660Grizz04]

Is there anywhere i can buy, front hydraulic brakes for my 2002 blaster ?? Would the new blaster brakes fit ?? What about like banshee front brakes ...? I thought i seen somewhere where they had them but i can seem to find it. My brakes where working awesome, but they locked up and somehow spun around and broke the inside hub part all to hell ... I'm done with these drum brakes ....

[04blaster]

Originally posted by 660Grizz04
Is there anywhere i can buy, front hydraulic brakes for my 2002 blaster ?? Would the new blaster brakes fit ?? What about like banshee front brakes ...? I thought i seen somewhere where they had them but i can seem to find it. My brakes where working awesome, but they locked up and somehow spun around and broke the inside hub part all to hell ... I'm done with these drum brakes ....
I have Disc brakes on my blaster, they work awesome...try to find a wrecked one for cheap to rob the brakes off

[660Grizz04]

So the disc brakes off the newer blaster fit the older ones ??

[04blaster]

Not sure, like i said...try to find a wrecked one or something that you could take the brakes off for real cheap to try, if they dont fit then sell them:D

[jd24_1]

yes 2003 up hydro brakes will work on all blasters. you have to get everything though. from what i have been reading if you can get 2003 up spindels that all blaster warrior banshee raptor hubs calipers etc will work but you have too have blaster 03 up spindels.

[660Grizz04]

Thats what i figured ... I looked at the schematics on bike bandit and they looked different where the hub goes, but for the bolting up it looks the same ...

[jd24_1]

i saw on blaster connection i think it was a guy used banshee spindels but had to fabricate some mounts. so the easiest way to do it would be 03 up blaster spindels. im looking for some too. but if you find another way please let me know. thanks alot

[jd24_1]

bye the way nice bike! i have 98 blaster fmf fatty power core 2 power reeds uni filter dg nerfs dg front n rear bumpers 75 over wise co piston fast bike but brakes suck looks almost like yours as soon as i get pics ill post.

Get 03 blaster spindles and all the rest of the parts from a banshee. Thats what I did.

[jd24_1]

been reading alot about this lately found out if you go too aftermarket a-arms like asr+3+1 you can use banshee warrior raptor blaster hydros just tell em when you order what brakes you intend to use.the asr arms run about 375 shipped from quadpartsguy on ebay.also for the rear you can put the banshee warrior setup on but you have to do a little fab work to do it.if you go too projectblaster forums a guy called daddio makes a kit for the caliper mount for 35.00 to mount it up they say its a real good setup then all you gotta do is fab a mount for master cylinder and fab it up too your brake pedal. hope this helps ya out!