PDA

View Full Version : starting problem


jimmy99ex
07-10-2006, 05:23 PM
when i try to start my 400ex the starter makes a spining noise for like 5 seconds then cruches and graps. the the motor will turn over about 1 or 2 stokes then slips off again and stay spining. any ideas will be great. thanks
brapbrap13
07-10-2006, 08:01 PM
Originally posted by jimmy99ex
when i try to start my 400ex the starter makes a spining noise for like 5 seconds then cruches and graps. the the motor will turn over about 1 or 2 stokes then slips off again and stay spining. any ideas will be great. thanks

my 2001 416 does that exact same thing, it will take forever to start sometimes, but if u do it on the right strokre it fires right up. i was told it is the start clutch?
DieselBoy
07-11-2006, 12:26 AM
sounds like a starter clutch...
firefighterjosh
07-11-2006, 01:16 AM
Starter clutch is going bad. I would fix it before you ruin something like the gears
brapbrap13
07-11-2006, 09:33 AM
where can i find a start cluth? is it hard to replace?
DieselBoy
07-11-2006, 08:54 PM
servicehonda.com
xcracer416
07-12-2006, 03:25 PM
im on my 4th starter clutch, they are simple to replace. GET a flywheel puller! it will save you alot of time and possibly money. they dont cost but like 15 dollars
brapbrap13
07-12-2006, 03:26 PM
Originally posted by xcracer416
im on my 4th starter clutch, they are simple to replace. GET a flywheel puller! it will save you alot of time and possibly money. they dont cost but like 15 dollars


were do u get your cluthes from?
07-12-2006, 06:17 PM
http://planethondaracing.com/
xcracer416
07-13-2006, 04:54 PM
i ge mine from honda, they arent much