RAD TAPERED Carrier: how to install???

[flaneledholes]

Hey I have a rad tapered carrier in the mail and well, I was wondering what to do to get it put on... I really need it up and going because I have been out of riding for over 1 and a half months now!!!

I'd buy a service manual,,there's a couple retainer clips that hold it in place,,shouldn't be to hard to swap out..

1:remove right side tire and hub
2:take breake caliper off
3:losen lock nuts (they are threaded backwards)
4:remove clip in axle that lock nut tightens against
5:slide lock nut and it's threads off
6:slide break disc and hub off
7:loosen chain and take it off
8:remove snap ring that holds the brake caliper braket on (proper tool makes this alot nicer)
9:remove bracket
10:slide axle and bearing carrier out of swing arm
11:slide carrier off of axle
12: slide new carrier on
13: repeat all steps in backward order!

it is pretty easy

[wscotthougland]

You are going to have to put some spacers between the swing arm and the skid plate if you want the grease zert on the top.

[Razorback]

the RAD carrier has the zerk on the sprocket side, not on the top or bottom, so he shouldn't have to worry about that. well, at least mine does...

[edit] just noticed his is a tapered, so it might be different. mine's a dual-row...

[flaneledholes]

Thanx alot guys, but Im still waiting on that s.o.b... I will have someone on hand that has alot of knowledge about quads but it also helps to know what you are getting yourself into...