View Full Version : 06 airbox lid
trick250r
07-08-2006, 09:09 AM
ok, has anyone else just taken thier airbox lid off... no HRC kit or anything? i know i'd need a pilot and main jet, but could i just get away with moving the clip down on the needle? thanks for any help.
atvridernc
07-08-2006, 09:21 AM
I dont think the needle is adjustable?
trick250r
07-08-2006, 09:53 AM
Originally posted by atvridernc
I dont think the needle is adjustable?
you can move the clip... at least you SHOULD be able to move the clip :confused:
atvridernc
07-08-2006, 10:18 AM
http://www.hmfengineering.com/forums/showthread.php?t=1128
450ERRRRRR!
07-10-2006, 07:38 AM
That what I did to mine. I just cut out he lid to match the hole in the HRC lid from the 05 model and added a Prodesign system with a K&N, and replaced the main from the stock 120 to a 170. I replaced the stock nonadjustable needle with the 05 crf 450 needle which is the HRC needle.I replaced the piloet from a 42 to a 45 and it seems to be a little rich. I think stock on the piloet is fine. I then added a DMC slip on exhaust and it's got more power than I know what to do with. If your not into the HRC kit then do these mods at the least and you"ll be surprized at the difference in power and sound:rolleyes:
Lonestar_R
07-10-2006, 11:22 AM
I cut my lid on my 06 and I have a Sparks Filter and billet adapter......took the baffle out of the exhaust......and right now I have a 48 pilot and a 160 main...with the CRF needle on clip 3 from the top.....it seems to run good...but I just got to go for the first real ride saturday so I'm going to do a plug check this week and see what i looks like and.....and the stock needle on an 06 is not adjustable.......just go buy the CRF needle.....also drop your leak jet to like a 40 or so...I'm running a 42 and it gets rid of all the lag and bog that everyone complains about....and you don't need an 80 dollar Quickshot cover to get rid of the bog....
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.