YamaWarr0121
07-07-2006, 06:04 PM
This bike is forsale now, Wil have it at Loretta Lynns and Unadilla Races - Located in South Jersey!!
Motor – TC RACING 450 “practice bike”
Tom Carlson professionally built stroker 450. This has a stroker crank, stock piston, and headwork done. This bike is, as well, kickstart, but the electric starter is still on and can be hooked up (I have a spare wiring harness for this bike). Has a brand new Tc TT exhaust hooked up, might be wearing a DASA for the Unadilla race.
This motor as well has a new case, new cylinder, new transmission, new clutches, new timing chain, new cams and shift forks. Entirely gone over and inspected. The transmission has 0 hours on it as of Unadilla, and the top end has a good 10 hours on it.
CHASSIS –
Full JRD Gusseted Chassis
- Swingarm ( Black ) – a little abused, but works well, new bearings at all ends has a lot of life left in it.
- 6 – Point Subframe – New mounts, straight and in great condition!
- JRD +3 Long Travel A-arms (chrome uppers, blue lowers) Some scratches and stuff, but this bike has more time on it as well.
- Honda 250R rear end – RPM Dominator Axle, RPM Anti-fade, RPM Carrier, cross-drilled rotor, new sprockets.
- Douglas Rear Beadlocks, and front regular wheels.
- JRD Nerfs, rewelded at a time, but very strong and have a lot of life in them!!
- Elka Elite Longtravel Front and Rear shocks. Fully adjustable, brand new recently serviced with new lines, oil, nitrogen, springs, bumpers, everything brand new ($670 bill!)
- Terry Racing Adj Damper
- JPMX Gripper Seat Cover
- Laker Custom Plastic – JRD Mechanical Race Graphics
- Houser Racing +1 Stem
- Tag T2 Bars
All of my bikes have their oil changed after every ride, clutch changed regularly, everything is kept up on and built with precision and accuracy. You will not be let down with either of these bikes. I have so many stock yfz parts in my garage that I just need to get rid of as well, so for a little extra I’m sure I can find anything you could need!)
..PRICE - $9000 obo
Some parts differ than picture...
Motor – TC RACING 450 “practice bike”
Tom Carlson professionally built stroker 450. This has a stroker crank, stock piston, and headwork done. This bike is, as well, kickstart, but the electric starter is still on and can be hooked up (I have a spare wiring harness for this bike). Has a brand new Tc TT exhaust hooked up, might be wearing a DASA for the Unadilla race.
This motor as well has a new case, new cylinder, new transmission, new clutches, new timing chain, new cams and shift forks. Entirely gone over and inspected. The transmission has 0 hours on it as of Unadilla, and the top end has a good 10 hours on it.
CHASSIS –
Full JRD Gusseted Chassis
- Swingarm ( Black ) – a little abused, but works well, new bearings at all ends has a lot of life left in it.
- 6 – Point Subframe – New mounts, straight and in great condition!
- JRD +3 Long Travel A-arms (chrome uppers, blue lowers) Some scratches and stuff, but this bike has more time on it as well.
- Honda 250R rear end – RPM Dominator Axle, RPM Anti-fade, RPM Carrier, cross-drilled rotor, new sprockets.
- Douglas Rear Beadlocks, and front regular wheels.
- JRD Nerfs, rewelded at a time, but very strong and have a lot of life in them!!
- Elka Elite Longtravel Front and Rear shocks. Fully adjustable, brand new recently serviced with new lines, oil, nitrogen, springs, bumpers, everything brand new ($670 bill!)
- Terry Racing Adj Damper
- JPMX Gripper Seat Cover
- Laker Custom Plastic – JRD Mechanical Race Graphics
- Houser Racing +1 Stem
- Tag T2 Bars
All of my bikes have their oil changed after every ride, clutch changed regularly, everything is kept up on and built with precision and accuracy. You will not be let down with either of these bikes. I have so many stock yfz parts in my garage that I just need to get rid of as well, so for a little extra I’m sure I can find anything you could need!)
..PRICE - $9000 obo
Some parts differ than picture...