Cuttinkid
07-07-2006, 02:37 PM
This is a fully race ready 416ex. All of the parts that I have put on it are listed below. The only problem is that the rear tires are somewhat worn, but I will get some new ones. The front tires are halfway worn, but are still in good condition. The engine has only a couple of races on it and I have a freshly rebuilt rear shock. This bike has about $13,000 worth of parts. I am asking $5,500 O.B.O
I live near Houston, Tx.
Chassis
Laeger Swingarm +1.25"
Laeger A-Arms +2"
Durablue Eliminator Axle
Hermann bearing carrier
K&K seat latch
Graydon Proline Auliminum nerf bars
Graydon Proline front bumper
AC racing full skid plate(taken off)
Nacs engine case saver
DID 520 X-ring chain
36 tooth rear sprocket
TM Design works chain slider
Roll Design footpegs
Pro Design shifter
Hinson billet brake pedal
Controls
PEP Clutch Lever
Terrycable billet thumb throttle
Tag X2 bars with mounting kit
Pro Design Kill Switch
Renthal grips
Braking braided alum. front brake lines
EBC brake pads
Engine
Barnett clutch plates and Barnett clutch basket
Curtis Sparks 416 GNC National Kit
X-6 Ceramic pipe
stock carb mod
drop in cam
cylinder bore w/ long head studs
JE 12.5:1 Piston
OMF cooling shroud
K&N powerfilter
Dynojet jet kit
White Bros rev kit
Outerwears filter cover
Rims/Tires
ITP Holeshot 20"X6"X10" MX front tires
Douglas rolled bead 10"X6" front rims
ITP Turf Tamers 18"X9.5"X8" rear tires
Douglas 8"X8" rear rims w/ Champion beadlocks
Nac's rear rim mud inserts
Suspension
K&K front shock mounts
Works Triple Rate Front Compression Adj
Works Ultracross Rear Rebound Adj
Denton steering stabilizer
Shockwears front shock covers
Pivot Works swingarm/linkage bearings
Body
Numbers
Number background
Maier Front Race Fenders (red)
Maier Rear Fenders(red)
I live near Houston, Tx.
Chassis
Laeger Swingarm +1.25"
Laeger A-Arms +2"
Durablue Eliminator Axle
Hermann bearing carrier
K&K seat latch
Graydon Proline Auliminum nerf bars
Graydon Proline front bumper
AC racing full skid plate(taken off)
Nacs engine case saver
DID 520 X-ring chain
36 tooth rear sprocket
TM Design works chain slider
Roll Design footpegs
Pro Design shifter
Hinson billet brake pedal
Controls
PEP Clutch Lever
Terrycable billet thumb throttle
Tag X2 bars with mounting kit
Pro Design Kill Switch
Renthal grips
Braking braided alum. front brake lines
EBC brake pads
Engine
Barnett clutch plates and Barnett clutch basket
Curtis Sparks 416 GNC National Kit
X-6 Ceramic pipe
stock carb mod
drop in cam
cylinder bore w/ long head studs
JE 12.5:1 Piston
OMF cooling shroud
K&N powerfilter
Dynojet jet kit
White Bros rev kit
Outerwears filter cover
Rims/Tires
ITP Holeshot 20"X6"X10" MX front tires
Douglas rolled bead 10"X6" front rims
ITP Turf Tamers 18"X9.5"X8" rear tires
Douglas 8"X8" rear rims w/ Champion beadlocks
Nac's rear rim mud inserts
Suspension
K&K front shock mounts
Works Triple Rate Front Compression Adj
Works Ultracross Rear Rebound Adj
Denton steering stabilizer
Shockwears front shock covers
Pivot Works swingarm/linkage bearings
Body
Numbers
Number background
Maier Front Race Fenders (red)
Maier Rear Fenders(red)