Cam ?'s

[flauge]

I read somewhere that the magnum stg 2 cam has a little more lift and duration that the hotcam stg 2. Is that true? Does anybody know the specs on the magnum?
thanks...

[GPracer2500]

I've tried to find specs on the Magnum cams but never found them. If anyone knows, speak-up!

[TYTE440]

Originally posted by GPracer2500
I've tried to find specs on the Magnum cams but never found them. If anyone knows, speak-up!

x2

[siggy konowaluk]

i actually just put the stage 2 hot cam in mine with a crf450 cam chain. i think the hot cam is pretty good so far but i havnt really looked up into the magnums. there probobly isnt going to be a whole lot of a difference between the 2 different companys though.

[togup]

I just happen to have a magnum stage 2 , dont know the specs but if someone has a hot cam stage two we could compare the lift and duration measurements

[riotact]

I just found a Magnum stage 2 on ebay and it says:

Note: Valve timing is checked with zero valve lash @ 0.050 inches of valve lift. Intake Lift: 350, Exhaust lift 345 & Duration 256'

Here is the item number if you wanna check it out:

Item number: 300429022170

[NacsMXer]

Originally posted by riotact
I just found a Magnum stage 2 on ebay and it says:

Note: Valve timing is checked with zero valve lash @ 0.050 inches of valve lift. Intake Lift: 350, Exhaust lift 345 & Duration 256'

Here is the item number if you wanna check it out:

Item number: 300429022170

Sounds like the same specs as these 3 cams for the 400:

- GT Thunder....... .350, .345, 256, 256
- WB Track.......... .350, .345, 256, 256
- WEB 450/451..... .350, .345, 256, 256

Hotcams stage 2 isn't far off:

- Hotcams stg 2... .354, .350, 254, 248.5

[TYTE440]

Originally posted by riotact
I just found a Magnum stage 2 on ebay and it says:

Note: Valve timing is checked with zero valve lash @ 0.050 inches of valve lift. Intake Lift: 350, Exhaust lift 345 & Duration 256'

Here is the item number if you wanna check it out:

Item number: 300429022170

yah thats all i could find for info also, i had my valves at stock and it would cut out on me, so i put them to .006 exhaust and .005 intake and it seems allot better. Gonna go a little further out and see what it does.

[underpowered]

the magnum stage 2 is the same profile as the original stage 2 hot cam. the profile was changed a few years back to a milder grind on the stage 2 hotcam and the stage 3 was then added, when first introduced it was known as the "stroker" cam.

i loved the power of the original stage 2 hotcam, great all around IMO. but i like my stage 3 i have now as well, has a little more on top.