300 starting mx build up

[300exrider25]

i have of course a 300 ex and i already have a dg exhuast , kn airfilter, moose stage 2 jet kit, and uni air box vents now i need a suspension kit and i would like to hear yalls opinoins on what to get but first i am only 15 and there for dont have a lot of money so i need a good but cheap suspension kit. thanks

[Sjorge450R]

Originally posted by 300exrider25
i have of course a 300 ex and i already have a dg exhuast , kn airfilter, moose stage 2 jet kit, and uni air box vents now i need a suspension kit and i would like to hear yalls opinoins on what to get but first i am only 15 and there for dont have a lot of money so i need a good but cheap suspension kit. thanks

rebuit 2001 raptor rear, with Burgard +2 a arms with elka recs.

[Caseys 300ex]

If i were you i woudl get on ebay and buy a pair of 400ex shocks, then buy a shock conversion kit so you can put the shocks on your 300ex, and finally i would buy a used raptor shock for the rear. This should cost under 300 dollars if you shop right.

[elementryder]

get somw burgard +2 400ex a-arms,hetrick shock relocater,and some 400ex works shocks,01 raptor rear

if you get 300ex a-arms get +3

[MX300ex]

if your going to get into MX i really think u need to loose the DG...

anyway if u want to go as cheap as possible..

stock 400ex aarms, shock relocater, 400ex shocks

if u have some money to spend..burgard 400ex aarms, shock relocater, and works 400ex shocks

[300exrider25]

the dg is just a temperary exhuast does anyone know the site for the burguard aarms?

[300exrider25]

oh and by the way i am having trouble getting my carb synced i used the 128 main and turned the mixture screw out 3 turns like it said to do and i have be adjusting it for about 4 days now and the whole time it has been running extremely lean and it seems that everytime i adjust it it just stays where it is and doesnt change at all so if anyone could tell me anything i would appreciate it thanks.

[JoE4554]

www.burgardcycle.com

[300ex mxracer]

if ur on a budget i would get asr a arms. ive run them without a prob for two years plus a lifetime warrenty.

[zeppelin]

Originally posted by 300exrider25
oh and by the way i am having trouble getting my carb synced i used the 128 main and turned the mixture screw out 3 turns like it said to do and i have be adjusting it for about 4 days now and the whole time it has been running extremely lean and it seems that everytime i adjust it it just stays where it is and doesnt change at all so if anyone could tell me anything i would appreciate it thanks.

this might help... http://www.exriders.com/vbb/showthread.php?s=&threadid=221872

if you read it and you still need help just pm me..

[drifterx]

Originally posted by 300ex mxracer
if ur on a budget i would get asr a arms. ive run them without a prob for two years plus a lifetime warrenty.

I got Burgards for the same price as ASR's. The burgards have much better ball joints. Hellbound sells them for 400. And pick up a set of works triples if you don't want to spend a crap load, and a raptor rear shock, or a 350x rear end. Then pick up a new pipe, and nerfs and kill switch if you don't have them already, and you'll be set ;) .

[LT250RMan]

Originally posted by 300exrider25
oh and by the way i am having trouble getting my carb synced i used the 128 main and turned the mixture screw out 3 turns like it said to do and i have be adjusting it for about 4 days now and the whole time it has been running extremely lean and it seems that everytime i adjust it it just stays where it is and doesnt change at all so if anyone could tell me anything i would appreciate it thanks.


Put a bigger main jet in you carb if its running lean.

[exrider008]

i have an 01 raptor 660 rear shock for sale 110 OBO

[300exrider25]

how much would the shipping be for the shock?

[exrider008]

115 shipped to ur door.

pics of it on my 300

[exrider008]

...

[exrider008]

its a little dirty in the pics but if u buy it i will clean it up.

[300exrider25]

ok um its gonna be a few days before i can let yu know my quad is in the shop and i dont know how much it is gonna be im gonna get it back tuesday or wednesday so i will let you know thanks

[exrider008]

sounds good.