How do you tighten up a stock chain?

[4LEAFCLOVER]

My chain is kinda loose and I was wondering if there is a special tool needed to tighten up the chain? If not then how do you tighten it up? Any help would be appreciated. Thanks

[450robot]

just untighten the 4 bolts on the back of the swingarm, and insert a thick screwdriver into the little wholes in the bearing carrier, and push downward until your chain has the reccomended slack (about 1 inch of play)

[sammy5x]

Take off your seat. Pull out the black square thin plastic box. Read your owners manual.:D

[4LEAFCLOVER]

Originally posted by 450robot
just untighten the 4 bolts on the back of the swingarm, and insert a thick screwdriver into the little wholes in the bearing carrier, and push downward until your chain has the reccomended slack (about 1 inch of play)

Thanks for the info man, I'm going to get on it ASAP because it's a little lose. Thanks again man!

[450robot]

no problem

If you still have the tool kit the tool is in there.

Originally posted by sammy5x
Take off your seat. Pull out the black square thin plastic box. Read your owners manual.:D

Would you like that kind of smart *** answer if you had a question?

[Abrannan19]

actually....yes, thats how I like it..