little problem

[TRAV05]

well i got all my seals for my rear brake today replaced them fine. but as i was putting it back together i forgot to adjust the jam nut on the i think its the praking brake unit and i ended up cracking the housing of the parking brake. do i need this part or could i rig it up to work without it

thanks

[GPracer2500]

Ditching the "hardly works" parking brake an using a parking brake block-off plate is a common mod.

http://www.off-road.com/atv/projects/400ex/protech/DSC_0058.jpg

http://www.off-road.com/atv/projects/400ex/protech/DSC_0026.jpg

I just grabed those pics of the web. You can get a block-off plate from tons of different places. Hope that helps.

[krt400ex]

Originally posted by GPracer2500
Ditching the "hardly works" parking brake an using a parking brake block-off plate is a common mod.

http://www.off-road.com/atv/projects/400ex/protech/DSC_0058.jpg

http://www.off-road.com/atv/projects/400ex/protech/DSC_0026.jpg

I just grabed those pics of the web. You can get a block-off plate from tons of different places. Hope that helps.


ya and they are cheap too. it will only cost u $10-$15. that is prolly cheaper than buy a replacment part from ur dealer

[250x_kyle]

tusk block off plates are 7.99