Blaster clutch help...fast.

[jsmith2232]

My buddies brother just put in new OEM plates and springs in his blaster. Now when the motor is running the lever seems to do nothing as far as disengaging or engaging but when we kick it into gear with the tires off the ground they spin around a couple times and come to a stop. the lever has a very light pull and there is a bit more resistance when pushing the quad in neutral then when in gear with the motor off but not enough to turn over the motor. if someone can help me out trouble shooting this that'd be awesome. thanks.

[krt400ex]

maybe u put the plates in backwrds? just a guess, never heard of this before:confused: :confused: :confused:

[EXevan91]

did u adjust the cable?

[kfx400isdashiz]

i always thought that was normal every blaster i have ever riddin does that. but who knows i hate workin on those things they piss me off

[86 Quad R]

when the pressure plate was re installed was it lined up correctly. there is only one way that the pressure plate goes in.

[ss440ex]

Try adjusting your clutch actuating rod.
It run through the clutch pressure plate and hub.
The nuts on the out side of the pressure plate.
Should help...

[†2005 400ex†]

did you torque the bolts to spec? could be part of you problem

[firefighterjosh]

Make sure your plates are in correctly, everything and tourqued correctly and that the cable is adjusted. I would get a clymer manual.