250r lonestar axle, carrier, misc. aftermarket stuff

[A A R O N]

250r lonestar adjustable axle up to +3, great shape...$150

250r lonestar billet bearing carrier with good bearings and a grease fitting in the center.....$75

Both those may work with a 400ex, not sure though^^^

-Aluminum grab bar, with tabs for a number plate...$20
-white maier plastic....$175
-all brakes and brake lines....offer for what you want
-87 motor, wiseco piston...$700
-all hubs....offer for what you want
-front steel braided brake lines....$35...will work with +2 or +3
Other little stuff....just ask

[TheLadiesMan]

Originally posted by A A R O N
250r lonestar adjustable axle up to +3, great shape...$150

250r lonestar billet bearing carrier with good bearings and a grease fitting in the center.....$75

Both those may work with a 400ex, not sure though^^^

-Aluminum grab bar, with tabs for a number plate...$20
-white maier plastic....$175
-all brakes and brake lines....offer for what you want
-87 motor, wiseco piston...$700
-all hubs....offer for what you want
-front steel braided brake lines....$35...will work with +2 or +3
Other little stuff....just ask

pics of the grab bar, and will it fit an 86 frame?

also pics of the rear hubs.

[440_Turtle]

Still got eh R engine, what are teh specs on it, when was it last rebuilt?

[A A R O N]

replied to your pm turtle...here is the grab bar, it will fit an 86.

[A A R O N]

and the hubs.....

[TheLadiesMan]

any cracks or bend in the grab bar? if not. i'll give you $20 shipped to 48353

[A A R O N]

$25 shipped an it's yours on the grab bar. NO CRACKS.

Turtle----your mailbox is full. I tried to reply and say that $50 shipping would be about what i could do on top of the price. It will cost more than that to ship, but i would cover that cost.

DONT EXPECT ANY RESPONSES FROM ME UNTIL SUNDAY EVENING. I'M GOING TO BE AWAY FOR A FEW DAYS AND WON'T HAVE ACCESS TO A COMPUTER. YOU CAN PM ME, I'LL READ IT WHEN I GET BACK AND WE'LL GO FROM THERE.

[300ex_#387]

Interested in the LSR axle. Can I get some pics?

[A A R O N]

The axle is on ebay. You can search for it, if you like it i'll end the auction and sell it for the right price. Here's a quick pic.

[250Renvy]

Can the axle be adjusted to Std width? Do you have an antifade nut for it? Do you do paypal?
$150 shipped to 48446?

[A A R O N]

I think if you put the spacers on the outside of the wheel instead of on the inside, it would get it down to stock width. I already sold the anti-fade......$175 shipped. It's heavy.

[fireburns99]

how many hours on the motor, and is there any porting, or aftermarket parts?

[A A R O N]

There are 3 hours on the top end of the motor. The previous owner told me it was all stock in the bottom end. The only aftermarket is the piston. There does not appear to be any porting. Runs great, plenty of compression.

[Honda6T9Rider]

If grab bar isn't SOLD please email me at modrevx@sbcglobal.net I'll take it for 25.00 shipped please email back asap

Terry

[JeremyKS]

can you take some close up pics of the axle?

[A A R O N]

.

[figair]

HI Aaron,
Would you take 70.00 shipped for the billet lsr carrier,also i know its for a 250r but I also heard that is should fit a 400ex?Do you know if thats correct,Please let me know I will buy asap.Thanks
Eddie

[figair]

Aaron I just read you thread again,sorry i did not read it fully.I think it should please let me know if you would take 70.00 shipped Ill grab that from you,Thanks again
Eddie

[A A R O N]

I'll take $80 shipped for it if you do paypal.

[figair]

Hi Aaron,I am very interested can you please post or send a pic..figair@cox.net..Also, yes I do have paypal..As soon as I get a pic Ill check her out,and ill buy right away if I like.:D Thanks Aaron
Eddie Are the bearing pretty new

[A A R O N]

here

[A A R O N]

another