air box eliminator

[danbobsR]

Has anybody else bought the esr airbox eliminator kit and it NOT fit? On my bike the carb is pointing straight into the frame and the straight pipe esr gave me is not even thinking about fitting. anybody else? or am I suppose to do something else

[kustomfab2003]

On mine I have to run a rubber piece from the carb to the aluminum sleeve and then the K&N mounts there.

[zedicus00]

u runnin a CR intake boot or what?? sometimes you can tweak the carb into the boot ant get it to point sumwhere else...

[danbobsR]

as far as I know it is the stock cr boot I got a stock trx boot but they both point out the same direction I got problems of another sort as well just started the bike for the first time and I got coolant makein its way into the exhaust somehow when I got the motor the head was all rtved up I cleaned it all off and used new orings and Of course now I got probs I cant win

[707trx250r]

I had trouble with mine. I finally got it on but then it kept wiggling loose. I just put the stock box on with a k&N filter, outerwares, and duncan air box rings. I noticed no loss in power and am more happy with the stock box. Also my esr kit came with a cheap K&N wanna-be filter. It wasn't a true K&N.
later
Adam:macho

[danbobsR]

I wish I could use the stock airbox But I got a centermount pipe so That is kinda out of the picture I got the ghetto pvc connecting the stock boot to the filter hopefully it is temporary

[zedicus00]

just get a carb mount K&N filter, u can order them right from there sight, then get a water proof outer whares, the piece of tube esr sends does nothing, i dont know why they dont go to a tru carb mount filter.

i did this on a blaster and have stuff speced to do it on my project R.

[WareRacing]

sounds like ESR sent you te wrong intake, the just did that to me as well.

[bada440ex]

go on ftz and buy there filter