PDA

View Full Version : National built blaster motor



blastermx_00
06-20-2006, 02:06 PM
Ok i got a yamah blaster complete engine that ima try to sell. Just checking interest i guess. It's still on my race blaster but if i can sell it ima part the whole quad. The motor has a fresh hone and piston in it. It has a wiseco .020 over piston and rings were just replaced. All bearings are good and engine has had belray 75wt gear oil ran through it and changed after every ride. The pre mix was alwayse ran on motul factory blend 800 with 110 leaded race gas at a 32:1 mix. The head is also cut for 110 octane gas. The head and cylinder are beadblasted for cooler running. Has a polished side case also. Has boyseen dual stage racing reeds installed. Now the motor has had major port alterations and is FAST!!!!! Blows away 300ex's that are built off the line every time. This is a national built motor and is built to race. The motor is at 198cc so it is ama legal. I am willing to sell it with the carb which is a 30mm cpw race carb and the 14th front sprocket and ignition system for $1100 OBO. If you want it without the carb and ignition pm me an offer. Make sure to add if you want everything or just the motor. Thanks for looking and please ask any quaestions that you might have. SUPER FAST ENGINE!!!!!!!