is this caused by a blow shock

[polcat1p]

one of my shocks is blown(leaking)
Would this cause my tire to camber like this.
its the clutch side

[schulte_85]

most likely

[Pappy]

Your upper arm controls the camber...id have to say that there is more then likely another problem.

[polcat1p]

they are both adjusted the same .

[Sjorge450R]

Originally posted by polcat1p
they are both adjusted the same .

your frame could be tweaked and the one side might have to be adjusted more.

[JW450R1]

toe is also affected by the camber angles.it looks like from the pics. that the toe might be out(negitive) to far.but something elso may also be the problem.

[Lonestar_R]

it needs to sit on level ground and not everything has to be adjusted the same......manufactuering differences could affect this also....

[Old Head]

I have the same problem but without the blown shock I'd say I have a bent spindle cause i didn't notice it till after i caught a tree. wasn't going fast but it was enough to throw it off.

[fastrider450r]

its no big deal mine does it a little because i hit 2 tractor tires at a race at about 4th gear pinned, i think its just the arm on my spindle maybe a little bent