Brian112233
06-15-2006, 04:02 PM
You are looking at my 1989 250R with LOTS of aftermarket parts and a fresh motor and trans rebuild with less than 10 hours on it. With this motowork, this thing easily keeps up with my buddies Raptor in tourque and HP! The aftermarket parts include... Ohlins front suspension Works rear suspension All new swingarm and A arm bushings Xcel swingarm Bell Racing steering stem and quick release seat latch Hot Rods 4 mil stroker crank 60 over wiesco piston .020 milled head requires 110 octane race fuel **Stock head included as well, when installed you can run pump gas*** 36 mil. Kiehn carb Boysen Rad valve with carbon reeds and 5 mil spacer Full FMF exhaust Hinson clutch components JP racing/Lonestar extended 2plus2 axel & berring carrier JP racing/Lonestar A arms stock width PEP Steering stabilizer DG front and rear fat alloys bumpers K&N air filter with outerwears New sidewinder sprokets New O ring chain Douglas bead lock rims with newer titan fast treker tires DG fat alloys nerf bars Renthal bars with pro design kill switch This thing runs like a top and is VERY fast...completely race ready and 5th gear wheelies are no problem at all! This thing will smoke piped and jetted banshees and 450Rs all day long. Please Feel free to contact me with any questions. Between the time these pic were taken and now,the A-arms were removed, sandblasted and painted to look new. also, a have polished rims and newer sand tires if anyone is intrested. if i get 4200 i will ship anywhere in the lower 48 states free to the buyer
here is a link to a picture: http://www.atvtrader.com/atvt/upload/1149643972.jpg
email me with questions at btsb032304@hotmail.com or call me at 630-546-6183
here is a link to a picture: http://www.atvtrader.com/atvt/upload/1149643972.jpg
email me with questions at btsb032304@hotmail.com or call me at 630-546-6183