88/89 Swinger on an 86 frame

[RidetheRed]

Can Someone show me some pictures of the motor mount that has to be welded on an 86 frame to run a 88/89 swingearm. Do I have to cut a current mount off and move it, or just add another mount to the frame?

[SET THE STAGE]

i thought they were interchangeable? i had always heard all you need to run it is the linkage off an 86

[deathman53]

no, you need a rear motor mount welded in. also the 88 swinger is 1" shorter than a 86/87 and your shock will be off, you should use the right linkege piece too.

[RidetheRed]

I can use my stock shock. How can I run a no-link setup? What are some Custiomixing jobs I can do with my swingarm.

[86 Quad R]

here ya are dood

http://www.imagestation.com/picture/sraid190/p729b80dd08675466d9b36c667c3e97d2/f1e70162.jpg

http://www.imagestation.com/picture/sraid207/pa395e8dbb7b799c7919023a6259076c9/ee9a7bf7.jpg

http://www.imagestation.com/picture/sraid166/pde270958a92d2964a775699175d5d7a8/f4577276.jpg

[honda350r]

This is way easier!!

[honda350r]

Just weld the cut brackets on the bottom of the frame .. It works great and is very strong!

[RidetheRed]

Sweet. Could I possibly just run my shock bolted directly to my frame and swinger and toss out the linkage altogether?