apollo
06-12-2006, 07:10 PM
2005 YFZ 450 MX READY
Chassis & Suspension
- +2 3/8 Long Travel ATV Four Play A-Arms
- Stock Length ATV Four Play Swingarm with Billet carrier (new bearings)
- RPM Axle
- Frame gusseted by JB Racing and powdercoated translucent blue
- Triple rate PEP big can front shocks (set up for 190lbs A rider)
- Single rate big can rear shock (same)
- Baldwin Motorsports built the shocks, they have less then 20 rides on them
-ATV Four Play Anti-Vibe steering stem with fat bars
- JB Racing 6-point subframe
MOTOR
- GT Thunder bored cylinder to 449cc
-GT Thunder stage 2 national porting
- Cam retarted
- 13 1/2 to 1 JE piston
- Motor was rebuilt by GT Thunder and has 3.2 hrs
Other
- White Brothers Carbon Pro Exhaust
- Works connection clutch lever and perch
- Baldwin case saver
- PEP easy pull clutch arm
- PEP chain roller relocator
- Baldwin/ Honda throttle assembly
- Pro Design kill switch
- Pro Design air box system (4 extra filters)
- DG Pro peg nerfs
- 4/1 Douglas Aluminum front wheels with Holeshots (1/2 worn)
- Douglas rear beadlocks with Holeshots (80% left)
- Extra set of Douglas rear beadlocks and new Turf Tamers
- Extra seat (has holes in the sides from staples needs seat cover)
- DG National front and rear bumper
This bike has stock plastic with the normal boot scratches and what not. Bike was very well maintaned with oil changed after every ride filter every other. New air filter every ride. The only things this bike need is a new seat cover and rear brake pads. Bike comes with all stock parts that were taken off with no hours on them!. Any questions call 330-353-2772 Mike. Or E-mail at maroofingco@yahoo.com I'll try to post pics if i can figure it out. Price $9,000.00 OBO
Chassis & Suspension
- +2 3/8 Long Travel ATV Four Play A-Arms
- Stock Length ATV Four Play Swingarm with Billet carrier (new bearings)
- RPM Axle
- Frame gusseted by JB Racing and powdercoated translucent blue
- Triple rate PEP big can front shocks (set up for 190lbs A rider)
- Single rate big can rear shock (same)
- Baldwin Motorsports built the shocks, they have less then 20 rides on them
-ATV Four Play Anti-Vibe steering stem with fat bars
- JB Racing 6-point subframe
MOTOR
- GT Thunder bored cylinder to 449cc
-GT Thunder stage 2 national porting
- Cam retarted
- 13 1/2 to 1 JE piston
- Motor was rebuilt by GT Thunder and has 3.2 hrs
Other
- White Brothers Carbon Pro Exhaust
- Works connection clutch lever and perch
- Baldwin case saver
- PEP easy pull clutch arm
- PEP chain roller relocator
- Baldwin/ Honda throttle assembly
- Pro Design kill switch
- Pro Design air box system (4 extra filters)
- DG Pro peg nerfs
- 4/1 Douglas Aluminum front wheels with Holeshots (1/2 worn)
- Douglas rear beadlocks with Holeshots (80% left)
- Extra set of Douglas rear beadlocks and new Turf Tamers
- Extra seat (has holes in the sides from staples needs seat cover)
- DG National front and rear bumper
This bike has stock plastic with the normal boot scratches and what not. Bike was very well maintaned with oil changed after every ride filter every other. New air filter every ride. The only things this bike need is a new seat cover and rear brake pads. Bike comes with all stock parts that were taken off with no hours on them!. Any questions call 330-353-2772 Mike. Or E-mail at maroofingco@yahoo.com I'll try to post pics if i can figure it out. Price $9,000.00 OBO