PDA

View Full Version : best way to sup up a banshee



jrb400ex
06-12-2006, 05:04 PM
what are a few easy ways to sup up a banshee?

banshee84
06-12-2006, 05:06 PM
for power exhaust is the cheapest way to go. It will give you the most hp per $100

bansheexcracer2
06-12-2006, 08:13 PM
get some good ruber on the rear for traction. and get rid of the stock suspention. pipes will also help greatly. If you have the money get toomey t5 or t6 pipes. otherwise i have dg's and they are good and pretty cheap. Dont get fmf.

enquadrider16
06-13-2006, 01:00 AM
my fmfs kick ***.

jimmy123_272
06-13-2006, 08:43 AM
do get fmf they are awesome

Mxjunkie
06-13-2006, 11:30 AM
I like my fmf pipes alot..


I'd go with.. New rear tires, full exaust either toomey t-5s or fmf fattys-powercore2's, air filter and vforce reeds :)

250r4life
06-13-2006, 12:36 PM
Originally posted by Mxjunkie
I like my fmf pipes alot..


I'd go with.. New rear tires, full exaust either toomey t-5s or fmf fattys-powercore2's, air filter and vforce reeds :)

i'm with him... yah, the rear tires work wonders... instead of just spinning your tires you actually move... i remember loving when i got my brand new set of holeshots... it was great... and yah, i would get t-5s or fmf as well... screw dg...

robjohn74
06-13-2006, 08:15 PM
k&n
fmf
bigger carbs..i have 34mmpjs

xlastshotx
06-13-2006, 11:30 PM
Rear tires are a great improvement I had the stock banshee rears and it would spin alot. I got Holeshot HD's and those work wonders tons of grip and alot less spinning.

250r4life
06-14-2006, 09:44 AM
Originally posted by robjohn74
k&n
fmf
bigger carbs..i have 34mmpjs

34s seem a bit large without some engine work....

06-14-2006, 12:47 PM
i am running 34mm Pjs as well, but if your dont plan on porting or major engine work i would go with a 30mm

robjohn74
06-14-2006, 10:27 PM
Originally posted by 250r4life
34s seem a bit large without some engine work....

runs good ....i run 5.5 in 300ft @74mph

i lined up with a guy that had a banshee that had almost the same set up ...he had dune port and i do not have any porting .i have 34pj and he had stock carbs and we ran 5 times he ran 5.4 in 300ft

the only down fall is going thru alot of gas.. other than that it runs good and strong and never had to fix anything but the kickstarter ..

Toadz400
07-11-2006, 03:39 PM
Originally posted by bansheexcracer2
get some good ruber on the rear for traction. and get rid of the stock suspention. pipes will also help greatly. If you have the money get toomey t5 or t6 pipes. otherwise i have dg's and they are good and pretty cheap. Dont get fmf.

Actually you have it backwards. You DON'T want to get DG's, they are known to be one of the worst pipes for the Banshee. FMF is a great all around cheaper pipe setup for the Banshee, very good pipe that has proven itself.

Get an exhaust, new suspension and new tires/wheels and you'll be set for awhile.