powerband

[400EXtreme]

On my ktm 125 there seems to be noo powerband whats so ever. Could it be something with the powervalve?

[Iliketogofast]

Yeah. You need to replace it; it sounds like it has a black one, which is for an all around power. You need the pink one!

[zeppelin]

sounds to me like you let your kanooter valves overheated, causing all of your blinker fluid to run over and ruin your muffler bearings, if i were you id just look into buying some new piston return springs...

[Iliketogofast]

Here we go :D

Does anybody still have the link to that site? I need to get a set of cross drilled brake lines for the Mustang :D

alright come on guys we all know the pink power band is only for the deser.

naa just kidding. it could be that your runnin to much oil in the mix. You could be running to rich. you will need it jetted. If this doesnt ork id take it to get liek a "checkup" at your local dealer. Could also be a crank seal and oil is leaking into you cylander.

Thats the same thing my CR125 doing

[watts16]

Put a new sparkplug in it, clean the air filter, and make sure you have the correct oil:fuel ratio.

[fatkid400]

Your pipe might have a crack in it.My old blaster (WAAYYY back in the day) cracked right at the seem,No pwerband what so ever.

[400EXtreme]

it has a new plug it has a clean air filter the ratio is rite.

[250ex13]

Originally posted by Iliketogofast
Here we go :D

Does anybody still have the link to that site? I need to get a set of cross drilled brake lines for the Mustang :D
http://kalecoauto.com/
:p :p :p :p

[1fst400]

sounds to me like its time for a top end job.

[400EXtreme]

Its got a brand new top end

[watts16]

Originally posted by 400EXtreme
it has a new plug it has a clean air filter the ratio is rite.

Have you looked at the reeds? It may just be jetted rich. Has it been like that since the top end job?

[TonyV]

Are your reeds ok ???