Laeger frame

[250Renvy]

Do the Laeger frames only accept CR500 link shocks and swingarms or can you put a stock 88 swingarm and linkage on a Laeger CR500 linked frame? Or is it just the swingarm that makes it a
CR500 link?

Still trying to figure out what frame to get that will fit with the stuff I already have without spending a ton more on no-link, cr500 link stuff.

[atvmxr]

The 250R and CR-500 have different mounting points for the dog-bone on the frame and the swingarm and you can only be set-up for one or the other. You can switch to a no-link set-up on either one, though.

[robyone]

I thought the cr 500 set up had to be a complete package... frame,shock ,swinger because the top shock mount on the frame is off center?

[zedicus00]

Originally posted by robyone
I thought the cr 500 set up had to be a complete package... frame,shock ,swinger because the top shock mount on the frame is off center?

you are correct. no link and link setups can transgender, but cr500 link is all on its own. yes, becuz its off center.

[250Renvy]

So if I want to put an elka rear shock on a CR500 link frame/swinger a no-link shock will work? Or again does it have to be a CR500 link shock that will/can actually bolt up to the dirtbike.


Does anybody know if Laeger's made standard link frames?

[robyone]

The shocks are not interchangeable, the no link shock works only with the no link swinger. And the cr500 shock & linkage only works with the cr500 mount frame and swinger.