View Full Version : Shifter Bolt
RUFIO
08-12-2002, 11:09 AM
on my 250ex, the ****er bent while riding, and i cant get the mother off. the screw just keep turning, can ANYONE help with this damn screw:huh
Castor-426ex
08-13-2002, 12:57 AM
well if you cant get it out more than likely you are gonna have to drill through the bolt andget a new shifter and a bolt...just dont weld it on there ok?;)
RUFIO
08-15-2002, 10:42 AM
Okay i got the son of b*itch of, but now i am putting a new stock shifter on. i didnt do this yet, but what happens if the thing the shifter goes, on is striped?
Castor-426ex
08-15-2002, 10:43 PM
that could be bad..if the splines are shot it could mean you have to get a new shaft....and that aint fun
4punksdad
08-17-2002, 12:12 PM
#1 you could clean up the splines on the shaft with a small triangle shaped file.
#2 you could just tack weld the shifter to the shaft once its installed at the correct angle.
#3 replace the shaft...............no fun like he ^ said.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.