Homegrown propegs

[patches85]

Whipped these up this afternoon

[patches85]

Another

[WILSONatv]

cool do they work good

[exrider008]

those look great nice job. if i were u i would make a few and sell them on ebay.

[patches85]

Yeah they work great! And I thought about the e-bay thing.

[Scro]

Originally posted by patches85
Yeah they work great! And I thought about the e-bay thing.

Just make sure you do some testing first. A footpeg breaking that you made could be a major liability issue.:(

[patches85]

Originally posted by bama450r
Just make sure you do some testing first. A footpeg breaking that you made could be a major liability issue.:(

I didn't change the mounts. I just cut the mount off another set and then split the rest down the middle. Then I welded a half to each side of the stock footpeg.

[Scro]

Ohhh, I see. I was thinking that they were made from scratch. Nice work;)

[wanta450]

put some kickups on them yet:D

[patches85]

Not yet! Man I am so busy!

[kyleschonert]

sharpen those bad boys and then you will be set. I did that to my stock pegs and didnt even add another one and could tell a MAJOR diff.

[patches85]

Went riding in a quarry tonight and these pegs rock!!!