My front wheel wiggles a little bit what is wrong?? help pleez?

[whitebrosex06]

My front wheel is wiggling not bad but enough .. everything is tight and all baearings are good nothing is beent i rann out of stuff to check can any one help me out??

[Scro]

Check for dirt in the bead of your rim.

[whitebrosex06]

ok i will if theres not is there anything else it could be?

[Scro]

The rim may be slightly bent, you just don't see it when it is not rolling. Also, take the rim off the hub, and make sure there is nothing between the rim and the hub. I don't know why there would be, but it doesn't hurt to check.

[whitebrosex06]

thinks yea i pulled eveything off and cleaned it everything ids tigh it just wiggles but i cant see nothing moving i cant figure it out should i still ride it everthing is tight and nothing is bent it just wiggles a lil bit when u shake it with ur hand

[Scro]

It wiggles when you move it with your hand? Try tightening up the nuts on your tie rod ends.

[whitebrosex06]

yea and no that much just a littl it dosent relly do it if u wiggle it buy the rim but it does buy the rubber

[Scro]

Your tire is wiggling, but your rim isn't? I'm confused, sorry:confused:

[LaLaLoosh]

double check your bearings. i bet that is it.

[whitebrosex06]

its wiggling idk it wiggles the rim and tire but eveything is on good and nothing loks bent and i checked all the bearings there all good.. should i still ride it??

[LaLaLoosh]

that is normally a bearing or a tie rod issue that would make it do that.

[Scro]

If everything is tight, it's either your bearings or tie rod ends loose. Or, your balljoints may be shot.

If it's none of those, I don't know what else it would be.

[whitebrosex06]

k ill check the tie rod ends but can i still ride it i mean is it going to fall off or should i be cool

[LaLaLoosh]

when you are wiggling the tire from side to side,,,look at the handlebars...are they moving as well......LOL

[Scro]

Just make sure everything is tight, it will be alright.

[whitebrosex06]

k thanks lol no my bars are not moving im not dumb lol it wiggles side by side

[Scro]

Originally posted by whitebrosex06
k thanks lol no my bars are not moving im not dumb lol it wiggles side by side

If your bars are not moving, the tie rod end is loose. Don't forget the ones that attach to the stem.

[Scro]

If it is just moving side-to-side and not up-down, that is also a sure sign of tie rod looseness:p

[whitebrosex06]

k i will thanks for the help i appreciat i will check it soon and tighten it and let you kno ..

[whitebrosex06]

lol i forgot witch one the tie rod is on mine i will have to find it lol but i will tighten it down

[Scro]

10-4

Glad we could help:ermm:

[QuadJunkies]

You prol. have a bad hub. I have the same problem with mine and with mine my bearing literally fell into the Hub and you should have to have them pressed in, this is causing the the hub to wiggle on the spindle.

If you checked everything else out, then this is prol. your problem as well. They are almost 200.00 thrwe Service Honda

I think I should try and shop around for aftermarket this time around if the price doesnt kill me .

:scary: :ermm:

[firefighterjosh]

Originally posted by QuadJunkies
You prol. have a bad hub. I have the same problem with mine and with mine my bearing literally fell into the Hub and you should have to have them pressed in, this is causing the the hub to wiggle on the spindle.

If you checked everything these out, then this is prol. your problem as well.

They are almost 200.00 threw Service Honda

I think I should try and shop around for aftermarket this time around if the price doesnt kill me

:scary: :ermm:

Same problem here