i want to re-jet my 06' myself any tips?

[drue4mpg]

i got the parts and tools, but i have never taken apart such a small carb any advice would help out alot i want to do all the work on my 06' myself...i just don't want to get in over my head
Thanx GO FAST

[mountaineer]

It is easy to rejet a fcr
On the bottom of your float bowl there is a 17mm nut that is where your pilot and main jet are located. Loosen you carb boot straps on both sides and twist you carb towards the shifter side. To reclip your needle you need to get an 04 ,05 or dirtbike needle the 06 needle is in a fixed position. pm me if you need help and I will give you my phone number and walk you through it.
Shawn

[Yfz450dan]

http://www.yfzcentral.com/invision/index.php?showtopic=32259


This is for the 04-05 but still may help out alot.

Download these videos..
Jetting 101 (http://www.eminencestudios.com/jetting)

I've never jetted anything before, and I dont consider myself very mechanically inclined, lol, but I watched the videos and then tryed it and it was extremely easy; had no problems at all.

[drue4mpg]

thanks ya'll i got it done in dialed in.....man i cant seem to keep the front down its much better in the mud too!!!