Parting out LSR YZF hybrid- Checing interest

[yzquadracer]

Well I cant get anyone to buy it out right so Im checking out parting it out, need frame and motor to go first. Let me know what you would be interested in.



2003 yzf450 engine
Curtis sparks stainless exhaust w/ big core. Curtis built it specifically for this frame. ESR intake, K&K aluminum oversized oil tank with Earl's stainless lines, Hinson Clutch, PWR Radiator, Lonestar 250r Geometry frame for Yamaha motors white in color, Lonestar DC-4 +3+1 a arms chrome, Lonestar DC-4 no link swingarm chrome, Custom Axis Triple rate dual adjust fronts, Custom axis dual rate dual adjust rear, Honda 450r front spindles and calipers, Hardkor billet front hubs, Galfer front and rear wave rotors, Lonestar axle, carrier, antifade, and rear hubs, AC pro pegs, bumper, and grab bar, Lonestar +2+1 chrome stem, Pro taper CR Hi bars, ASV pro clutch perch and brake lever, Galfer dual front brake lines, Quadtech naca hood, radiator shrouds, and seat cover, White fullbore plastics, Clarke clear tank.


Also have 2 sets of Ultimate fronts, 4/1, one set conventional center, other set billet.

[partyboy300ex]

i dont wanna buy it or anything cuz i already have one but i have a question
how much preload is in your rear shock becuase it looks like its sitting up really high in the rear
Thanks

[bh2285]

Damn how much you want for bike?

[Snow]

Price on Frame, motor, pipe, and electronics?

Pm me if you want.

Thanks.

[2 fast for you]

i am very interested in alot

[lonestar88]

how much for the custom axis fronts?

[figair]

I got 6,000 for the whole if still interested...

[Ripitupfilms]

pm me a price on the motor electronics and carb and pipe

[oj250r]

how much for you radiator shrouds??

[de400exer]

price on PWR radiator, frame, and clarke tank?

[Pro1200]

ASV pro clutch perch, Galfer dual front brake lines, Quadtech seat cover, White fullbore plastics?????? Prices please...

[yzquadracer]

My camera is not cooperating at the moment but I am making a big price list for everything. I will not let any parts go until I have the frame and motor sold.

2003 yzf450 engine W/ kicker+electrics- $2000
Curtis sparks stainless exhaust w/ big core- $350
ESR intake- $30
K&K aluminum oversized oil tank with Earl's stainless lines- $175
PWR Radiator- $200
Lonestar 250r Geometry frame for Yamaha motors white in color, W/ AC pro pegs and skid plate- $1500
Lonestar DC-4 +3+1 a arms chrome- $600
Lonestar DC-4 no link swingarm chrome-$400
Custom Axis Triple rate dual adjust fronts- $825
Custom axis dual rate dual adjust rear- $400
Honda 450r front spindles- $100
Honda 450r front calipers W/ galfer pads- $150
Hardkor billet front hubs, black with polished cap- $250
Galfer front wave rotors- $160
Lonestar axle- $250
Lonestar carrier- $140
Lonestar antifade W/ galer wave rotor- $225
Lonestar aluminum rear hubs, new style- $125
AC front bumper- $40
AC grab bar- $25
Lonestar +2+1 chrome stem W/ Pro taper clamp- $250
Pro taper CR Hi bars- $50
ASV pro clutch perch- $100
Honda 400ex master cylinder W/ ASV lever- $125
Galfer front dual lines- $65
Quadtech radiator shrouds- $100
250r seat W/ Quadtech seat cover- $175
White fullbore plastics W/ Quadtech naca hood- $375
Clarke clear tank- $100
Nac's stem clamp- $25
Douglas ultimate conventional center rims, 4/1- $150
Douglas ultimate Billet center rims, 4/1- $200
ITP holeshot mx fronts, 20X6X10- $75

Shipping will be buyers responsibility. I will combine shipping on multiple items. I have had numerous people already tell me about parts they are interested in. I am going to go back through my PM's and other parts to see who has dibs on what first. Hopefully my camera will cooperate soon and I will get pics of all parts. can PM me or email me at blasterracer33@hotmail.com I have some pics of stuff on the bike.

[Ripitupfilms]

good luck your prices are only 30% off reatail

[yzquadracer]

This bike is practically new....I can't give it away for pennies :(

[R3Concepts]

Originally posted by atvracer9m
good luck your prices are only 30% off reatail

I just parted out my little brothers Lonestar CRF. I asked the EXACT same prices that he has set. We have sold everything except for a few little pieces. The thread had 128 replies and 2774 viewers. I guess we were way off with prices as well, huh?

Dont like it? Dont buy. The quad I see above looks pristine.:rolleyes:

Free bump.

[Ripitupfilms]

i would have bought the engine but thats basically retail price thats the only thing i really wanted..

[Pro400EXC]

how much did you want for the whole thing?

[jrspawn]

Originally posted by atvracer9m
i would have bought the engine but thats basically retail price thats the only thing i really wanted..

2000, for a yz450 4 speed is a VERY good price, i had to search high and low just to find one and i paid more than that for it. In my opinion that engine is the absolute best mx engine out there, and well worth the money, if i was lookinig for another back up engine i would buy it for that.

Justin
jrspawn@aol.com

[oldfartracer]

How long are the front shocks
what weight rider are they for

[sprtrx300ex]

anypics of the rear shock? whats it valved for, swingarm?

[MAaudioX10]

I'd get the rear beadlocks right now, however, being that nothing ships until the frame sells......consider this a lost sale.

[gtilley45]

Originally posted by MAaudioX10
I'd get the rear beadlocks right now, however, being that nothing ships until the frame sells......consider this a lost sale.

I was interested in a couple things too. Has any of this stuff sold?

[Ripitupfilms]

what gearing did you run.. how do you like it being a 4 speed

[bubsyfz450]

Hey where are you located at? can you send me more pictures of the whole quad if you still got it. thanks. I might be interested.

Bubba

bubsyfz450@sbcglobal.net

[yzquadracer]

Bubs- pics were sent

ATVracer9m- I ran 14/38 gearing. The tranny is the same as the yfz just without the low first gear, in essence I have 2-5 gears.

Gtilley- sorry the frame and motor have not been sold yet....

The front shocks are 18.75 inches long, valved for 225# rider. Rear has the same specs.

Hopefully someone will buy the frame soon and everything else will be cut loose. Thanks guys...Mike

[yzquadracer]

more pics

[yzquadracer]

more

[yzquadracer]

Everyone post the exact parts that they want, If I have most of this stuff spoken for except the frame and motor I might cut her loose. Thanks for bearing with me guys, Mike

[gtilley45]

I'll for sure buy the Clarke tank and the Quad Tech radiator shrouds.

And depending on what you have left when I get the money, I'm also thinking about the a arms, steering stem, seat cover, swing arm, and plastic. Like I said, I'm considering this stuff if you still have it after I get more money. I've been having motor trouble and I've got to get it straightened out before I spend too much money on other stuff.

[figair]

If he doent want the shrouds there mineee!!!!!!!!!!!!

[pgregg85]

I will take the sparks pipe

[tazman7]

PM sent- very interested- I am from Illinois too.

[Chino886]

I want the ESR intake...

[Pro1200]

I'm interested in Galfer front dual lines- $65
and Quadtech seat cover

[yzquadracer]

more pics..

[yzquadracer]

...

[yzquadracer]

..............

[yzquadracer]

......

[yzquadracer]

........

[yzquadracer]

.......

[Ripitupfilms]

how much for the chain.. how many link is it and what brand

[wishmasstir]

if this quad ever actually gets parted out ... pm me cause i'll take the clear tank, the entire fender set w/shrouds and the whole seat. maybe wheels/tires too

[gtilley45]

I already called the tank and shrouds.

[Chino886]

pics of ESR intake?

[sprtrx300ex]

you have a PM on the rear shock

[figair]

Has anyone gotten anything..whats up

[gtilley45]

Originally posted by figair
Has anyone gotten anything..whats up

I think he was gonna try to sell the frame and motor first unless people spoke up for most of the other stuff. I'm ready to send payment for the clear Clarke tank and Quad Tech shrouds whenever he decides to let them go.

[figair]

Gtilly you beat me to those shrouds...:mad: lol

[yzquadracer]

just an update.....no i havnt parted this out yet... One person might be buying the whole thing. Hopefully we will know something soon...thanks, mike

[whoamack22]

what is the cash price for it the way it sits

[yzquadracer]

$9000

[oj250r]

actually i asked for the shrouds first....

[bad01300ex]

acctually i pmed him about the shrouds LONG before any of you guys posted anything

[yzquadracer]

why can't everyone want the bike as bad as they want the shrouds:(

[gtilley45]

Originally posted by bad01300ex
acctually i pmed him about the shrouds LONG before any of you guys posted anything

Before May 14, 2006? That's when I asked for them.

Here's evidence (http://www.********.com/forums/index.php?showtopic=6996) :D

[gtilley45]

Well, for some reason I can't get the link to work. But I posted in his thread on ATV scene on that date.

[tazman7]

sale pending:D

[gtilley45]

Originally posted by tazman7
sale pending:D

Would you want to sell the shrouds? :D :blah:

[MX450]

Originally posted by gtilley45
Before May 14, 2006? That's when I asked for them.

Here's evidence (http://www.********.com/forums/index.php?showtopic=6996) :D

Not sure, but i already have some, i was just lookin out for "yfzcomingsoon" from yfz central, he asked me where i got mine

so i dont really care:scary:

[tazman7]

your pm box is full mike

[yzquadracer]

bump...

[gtilley45]

I'm still interested in the stuff I mentioned, have money in hand. Let me know.

[250x_kyle]

just part it out already some one we will want the motor and frame guaranteed

[johnsls]

I'm interested in the ASV pro clutch perch and brake lever

How much + shipping?

[2 fast for you]

im out no money yfz broke

[yzquadracer]

Ok guys it is time to part it out.....I am going to make a new thread with all the prices on it....

[yzquadracer]

heres the new thread http://www.exriders.com/vbb/showthread.php?s=&threadid=238405