cr500 jug on trx250r bottom end

[TampaBoy813]

will it work?

[lee37vernon]

seen it said that its been done . you'd need to machine the barrell down some at the liner as its a lot bigger than the machining even for the 370 kits . not sure how many bores that would leave , i'd be interested to know anyone thats done it as the barrells can be picked up for next to nothing , bet it would still vibrate though , big old piston v balancer ?

[TampaBoy813]

yah I was thinking that it might not be that hard...I have the CT350 jug now..and would up to the CR500 if it was not a **** load of work...

[JxxxOxxxE]

There's a company somewhere that does this. I read about it in an article online once....

[TampaBoy813]

Originally posted by JxxxOxxxE
There's a company somewhere that does this. I read about it in an article online once.... http://www.atvsource.com/articles/product_reviews/2002/011602_mac_racing.htm

way to much work.....

[beerock]

yep was gonna post mac racing. it is alot fo work

why do that when the saber works

[TampaBoy813]

Originally posted by beerock
yep was gonna post mac racing. it is alot fo work

why do that when the saber works what is the saber?

[zedicus00]

Originally posted by TampaBoy813
what is the saber?

every R owners WET DREAM!

http://saberracing.com/

[danbobsR]

there was a complete saber motor up on ebay a few weeks ago with all the extras you would want for 4,000.00 thats a nice chunk of change for a R Motor

[zedicus00]

considering they come with pipe carb all the electronics a completly modified and reworked clutch and all the work they do to the bottom end even at 4k its a steal.

[Fast@$$Rider]

or you could stuff one of these in there and have a bad@$$ trx1000r http://www.trickracing1.com/The%20First%20CR500%20Made%20into%201000cc.html

[zedicus00]

i spose since they made a twin out of it it wouldnt vibrate as bad either.... thou ive never heard of or seen one of these things in action. unlike the saber which is actually on the shelf ready to order.

[C-LEIGH RACING]

That twin cylinder engine never was finished, a guy in OK bought the jugs to put on his 250Rs.

That Saber would be a good deal, it has different versions to build it to for your budget. Most every type of build I hear ends up being a torque monster

[cdrookie]

that one that was on ebay had over 100hp if i read the small pic of the dyno chart correctly! 4000 was a steal!