new HMF and Houser Stem

[400exMO]

I just got a new HMF Slipon black pipe and Houser antivibe steering stem. Will post more when installed. Sorry no pics of stem or clamp.

Thank you C@D Racing.

[400exMO]

Going on this.

[400exMO]

Also I got a 160 main jet and 42 pilot. I have this pipe and K@N and I run with the lid, should this be good jetting?

[LaLaLoosh]

sweet pipe

[WideEfnOpen]

well to give you an idea i have a trx 450R with a 13:1 piston hot cam stage 2 fully ported head full pro curcuit exhaust and i have a 155 main jet and the needle on the lowest setting i have a EGT welded into my head pipe and it runs at 1370 degrees wound right out ive ran the motor for over 100 hours now with no problem beat the living *&%# out of it and no problems so ya if that helps you at all

[400exMO]

No sorry it doesn't help me out at all.:)

[04TRX400EX]

Originally posted by WideEfnOpen
well to give you an idea i have a trx 450R with a 13:1 piston hot cam stage 2 fully ported head full pro curcuit exhaust and i have a 155 main jet and the needle on the lowest setting i have a EGT welded into my head pipe and it runs at 1370 degrees wound right out ive ran the motor for over 100 hours now with no problem beat the living *&%# out of it and no problems so ya if that helps you at all

I think he just really wanted to tell someone that cause it has no relevance to the jetting question ... at all :rolleyes: :devil: :D