chckmgntEX
05-20-2006, 07:30 PM
got a 2004 400ex.im in west virginia(1500-2000ft id say).hmf slip-on,uni filter,air lid on.it was about 60degrees today
bought the dynojet kit,went with their needle set in the 3rd spot like their instructions say,and put a 150 main in it,and didnt turn the air/fuel screw.ran it,plug was black around the threads,and white on top.went with a 160main,went 2.5turns out on the a/f screw,but didnt get a chance to check it.started good.seemed better on bottom end,but kinda felt sluggish tryin to rev out 5th,maybe it was just me.am i in the ballpark?
bought the dynojet kit,went with their needle set in the 3rd spot like their instructions say,and put a 150 main in it,and didnt turn the air/fuel screw.ran it,plug was black around the threads,and white on top.went with a 160main,went 2.5turns out on the a/f screw,but didnt get a chance to check it.started good.seemed better on bottom end,but kinda felt sluggish tryin to rev out 5th,maybe it was just me.am i in the ballpark?