View Full Version : killswitch hookup
450robot
05-17-2006, 03:57 PM
when hooking up the killswitch, what wire goes to the frame, and what one goes to the wiring
both my wires are the same length, so i dont know
so were does the wire coming from the nob go, and what about the other one
thanks
450robot
05-17-2006, 04:27 PM
bump! im kind of in a rush
HiperEX
05-17-2006, 04:32 PM
what type of killswitch is it
450robot
05-17-2006, 04:32 PM
prodesign
DieselBoy
05-17-2006, 04:36 PM
I'm wondering the same thing (which wire needs to be grounded, if any)
HiperEX
05-17-2006, 04:36 PM
on the prodesign there should be one wire shorter thats the ground wire the other is the positive
450robot
05-17-2006, 04:38 PM
ya, i know, but i cut mine when rebuilding my quad this year, and now there the same length
450robot
05-17-2006, 04:48 PM
bump!
ELewandowski
05-17-2006, 05:20 PM
on a killswitch, does it really matter which one you ground. I have a Tusk teather killswitch, and it didnt matter which one i grounded.
450robot
05-17-2006, 06:05 PM
oh come on! someone cant take a quick look out at there quad to find out for us?
motoboy66
05-17-2006, 10:04 PM
It doesn't matter which one is grounded to the frame, as long as one is grounded, and the other hooked to a hot ignition wire, then it will work. I hooked mine right to the green wire on the coil, but my buddies is hooked into the wire that goes to the kill ****ch on the bars. Sorry I cant remebmer which one it is.
Originally posted by 450robot
oh come on! someone cant take a quick look out at there quad to find out for us?
Or YOU could do a quick search, I just posted pics again a few days ago...
BTW, any future posts you make in the wrong section will be deleted:ermm:
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.