killswitch hookup

[450robot]

when hooking up the killswitch, what wire goes to the frame, and what one goes to the wiring

both my wires are the same length, so i dont know

so were does the wire coming from the nob go, and what about the other one

thanks

[450robot]

bump! im kind of in a rush

[HiperEX]

what type of killswitch is it

[450robot]

prodesign

[DieselBoy]

I'm wondering the same thing (which wire needs to be grounded, if any)

[HiperEX]

on the prodesign there should be one wire shorter thats the ground wire the other is the positive

[450robot]

ya, i know, but i cut mine when rebuilding my quad this year, and now there the same length

[450robot]

bump!

[ELewandowski]

on a killswitch, does it really matter which one you ground. I have a Tusk teather killswitch, and it didnt matter which one i grounded.

[450robot]

oh come on! someone cant take a quick look out at there quad to find out for us?

[motoboy66]

It doesn't matter which one is grounded to the frame, as long as one is grounded, and the other hooked to a hot ignition wire, then it will work. I hooked mine right to the green wire on the coil, but my buddies is hooked into the wire that goes to the kill ****ch on the bars. Sorry I cant remebmer which one it is.

[JOEX]

Originally posted by 450robot
oh come on! someone cant take a quick look out at there quad to find out for us?
Or YOU could do a quick search, I just posted pics again a few days ago...

BTW, any future posts you make in the wrong section will be deleted:ermm: