wolverine front drive shaft . . . .

[DieselBoy]

Okay, I was looking at the front driveshaft assembly, and I was wondering how the frig you get the Universal joint out. I'm not even sure you can. I was just wondering for future reference.

I'm new to 4x4 drivetrains on these thing's and they scare me personally (I'm a worrier.), Anyway, any help you can provide is appreciated.

[renae]

You take the snap rings off the inside of the universal cups. And press the cups out of the yoke. Do NOT try and take the nut off of the Yoke. Then you just pull the U joint out once the cups are pressed out it should preaty much fall out. Then you put the new U joints in and press the cups in with out misalining the needle bearings. And then put the keeper rings back on the cups.