86 250r engine ALMOST all there. comes w/2 cylinders

[SET THE STAGE]

title pretty much says it all, 250r engine that needs a little work. and i'll include 2 complete '86 cylinders, one with .60 over bore, intake boot (no reeds), and exhaust flange and one that's stock but would need honed. the bottom end has MOST everything, it's missing little pieces here and there and the crank might need to new bearings (meaning it would need to be pulled apart) but it has a few new parts on it like a new inner clutch hub, random bearings here and there, and a pressure plate for the clutch.

if you're interested let me know, i'll let it go for like 500-600. including both cylinders. let me know asap though, i need the money quick

also for like an extra 20 bucks i'll include a bills pipe (header only and is missing the extension piece but you could rig something up)

[SET THE STAGE]

hm, anybody?

[tazman7]

Id give you $100

[TheLadiesMan]

i'll give you $150

[SET THE STAGE]

..................


i could get close to 100 out of each cylinder on ebay.

[elbine69]

pics?

[SET THE STAGE]

i'll try to get some up in a bit.

also i know i'm WANTING 500 but don't be afraid to make REASONABLE offers. posting ridiculous stuff like 100 or 150 just pisses me off. please stop.

[TheLadiesMan]

whats the bottomend missing? and would you be willing to sell just the bottomend, no cylinders? any pics? LanceA0@comcast.net

[SET THE STAGE]

it's only missing little parts, i'm not really sure what the exact names are but they're just the little things like tiny ball bearings for random parts and stuff like that. nothing you couldn't get off ebay for cheap or servicehonda or whatever.

i'll try to get pics up soon once i get my camera back from my brother.

how much would you pay for just the bottom end?

[TheLadiesMan]

i would have to see pictures of it first to determine.

where are these parts missing from? like the stator side, clutch side, or from the inside of the main cases?

could you give me a general idea on where things are missing from.

also how are the cases, any cracks, holes, repairs. any other info you could give me?

thanks

[SET THE STAGE]

the pieces missing are from the inside (which is already split so you wouldn't have to worry about that or anything). all the pieces for the stator and clutch should be there. and to my knowledge the cases are fine, no repairs done that i can see or anything.

[SET THE STAGE]

http://i5.tinypic.com/11tuzrr.jpg
http://i6.tinypic.com/11tv0ao.jpg
http://i5.tinypic.com/11tv0h5.jpg
http://i5.tinypic.com/11tv0nt.jpg
http://i5.tinypic.com/11tv0uw.jpg
http://i6.tinypic.com/11tv0ya.jpg
http://i6.tinypic.com/11tv146.jpg

[250Rmaniac]

How much r you looking for, for just the bare cases and nothing else???

[TheLadiesMan]

i'll give you $400. shipped to 48353 for everything. both cylinder and all the engine peices.

[SET THE STAGE]

Originally posted by TheLadiesMan
i'll give you $400. shipped to 48353 for everything. both cylinder and all the engine peices.

$450 and you've got a deal. shipping won't be cheap.

[TheLadiesMan]

does it have all the bolts for the cases so that they can be put back together?

how are the cases, any cracks or repairs made?

how about $425. and i will either send you paypal or money order tomorrow?

[SET THE STAGE]

from what i know it has every bolt there, maybe missing like 1 or 2. but other than that it should be fine. no cracks or holes that i've seen anywhere. the front sprocket side seems like the chain has never been popped off.

$425 is fine i'll PM you my paypal address