IMS/Roll Design pegs for TRX250R

[HondaATC500X]

I'm thinking about buying a pair of these to adapt onto my Tri-Z. I know that at one time you could get just the peg, without the mounting plate. Was that some old style they dont do anymore or ? All I need are the pegs in 250R style mounts, without the plate that goes to the frame. Any help is appreciated.

[zedicus00]

88-89 style is the type i think yur wanting... its a peg that mounts to a piece of the frame that sticks out, no plate.

[lee37vernon]

look on e bay at the weld on peg extensions , i had these on my old tri z and they were good , quite a bite wider and longer with upturned ends and nice sharp teeth ,, think were only like $30 .zed is spot on by way it is 88/89 that mounts on similar to tri z ;)

[deathman53]

roll sells 2 different pegs, 86/87 and 88/89 the 86/87 will it in 86/87 200x, 86 350x, 86 atc250r, probably more. these are just the pegs and not the plate, the 88/89 mount is different. here is a pic of my 86 200c with roll 86/87 pegs

http://www.pictureposter.allbrand.nu/pictures/deathman53/200x+pegs.JPG.html