pro armor kill switch installation

[4oorider]

I just bought a Pro Armor kill switch. I have it installed, i just dont know where to put the 2 wires. I have the 0 ring terminals on the end. I have the frame ground done, but i am having trouble with the other that splices into the wires. I need to know where to splice the wire and which wire is the ground and the splice. Thanks

[55belair]

ground the black wire with the end on it, i spliced the other one into the black wire with a yellow chaser going into my cdi box. works like a charm.

[premiumtommy]

yup..thats it

[4oorider]

i dont understand what splicing means. i found the black wire from my cdi, so what do i do next.

thanks

[miller821]

If you still can't get it this link in the 3rd post in here helped me out a bunch... Check it out cause it has pics and tells stuff about it.. http://www.exriders.com/vbb/showthread.php?s=&threadid=32546

[4oorider]

if u look at the one picture with the killswitch wire going with the black and yellow one, i dont have one of them blue connector pieces, is there another way to do this?

[miller821]

Originally posted by 4oorider
if u look at the one picture with the killswitch wire going with the black and yellow one, i dont have one of them blue connector pieces, is there another way to do this?
I dunno, we used one of the connectors that we had in the back garage, but I dunno..

[4oorider]

thanks for all your help guys, i guess i am going to have to hit up Ace hardware and see if they have any